home
dust collectors
mist collectors
fume collectors
wet
scrubbers
vacuum systems
canister vacuums
HEPA vacuums
venturi vacuums
industrial
portables
portable electric
arco wand industrial
arco wand 1000
pb series
industrial
XtractMAX CCD
hopper-vac 65
gal
compact
series
regen series
PD
series
full-size series
centrifugal
series
continuous
duty
backpack
vacuums
ESD Vacuums
sump
vacuums
gas vacuums
central vacuums
vacuum
sweepers
floor scrubbers
vacuum
loaders
pre-separators
dustless hardwood
floor
refinishing
vacuum
hose and tools
vacuum
tubing & fittings
modular enclosure
systems / booths
commercial air cleaners
wastewater / coolant
filtration
hepa
air cleaners
contamination control
hexavalent
chromium
replacement filters
full
product list
about us
contact
us
site map
1-877-844-3293
Toll
Free (USA)
|
|
|
The DuroVac
QVP100L
Mid-Sized P.D.
|
DuroVac
Mid-Sized PD Series
Triple
filtration ensures 99.9% efficiency at just 0.4 microns.
7.5 or 10 Hp
Vacuum to 168" S.P. (12" Hg.)
Flow to 260 ICFM
58.3 Sq. Ft. filtration
29.9 US Gallons usable storage
Runs under 85 dBa @ 3 ft
The 10 Hp
model sucks up 60 pounds of fine powder per MINUTE at the
end of a 50 foot long hose.
|
Want to use a 100
foot long vacuum
hose? Need to clean-up powder spills
fast?
The DuroVac
"PD" Series gives
you the high performance suction you need in the easy-to-move QV
frame. When you need serious power, you need a
positive displacement vacuum producer.
That's because it actually pulls harder as the job gets tougher. In fact, our design
moves material three times faster than other vacuums using centrifugal
vacuum pumps of
the same horsepower!
Since the Positive Displacement Series machines all feature our
exclusive triple filtration system, even ultra-fines like iron oxide and fly ash
are never a problem. And like all our portables, all model have a high efficiency,
cartridge type inline filter that can easily be upgraded to HEPA type.
Toll Free (US)
1-877-844-3293
PD Series Common Features:
- SUTORBILT "Legend" positive displacement vacuum pump
- premium efficiency TEFC motor selected for its dependability
- primary filtration efficient to 99.99%
@ 0.4 microns, standard
- inline filter for operator protection, easily upgrades to HEPA type
- effective internal filter bag shaker
- filter condition indicator
- 12" front wheels (with bearings), heavy-duty 6" rear casters
- forklift channels and crane lift on all systems,
standard
- heavy duty, all steel frame construction 29"w x 50.5"l x 70"h
- a beautiful, urethane, high gloss finish
PD Series Specific Features:
| |
QVP75 |
QVP75L |
QVP100 |
QVP100L |
| System
Horsepower |
7.5 Hp |
7.5 Hp |
10 Hp |
10 Hp |
| CFM
(Maximum) |
170 acfm |
170 acfm |
260 acfm |
260 acfm |
| Vacuum
(Maximum) |
168"
S.P. |
168"
S.P. |
168"
S.P. |
168"
S.P. |
| Typical
Conditions |
150 acfm @ 85" |
150 acfm @ 85" |
190 acfm @ 100" |
190 acfm @ 100" |
| Primary
Filter (s.f.) |
30.8 |
24.4 |
30.8 |
24.4 |
| Secondary
Filter (s.f.) |
22.8 |
22.8 |
34.0 |
34.0 |
| Total
Filtration (s.f.) |
53.6 |
47.2 |
64.8 |
58.3 |
| Air
to Cloth Ratio |
4.9:1 |
6.1:1 |
6.2:1 |
7.8:1 |
| Storage
(US Gal) |
18.3 |
29.2 |
18.3 |
29.2 |
| Noise
Level @ 3ft |
82 dBa |
82 dBa |
85 dBa |
85 dBa |
| Weight |
725 lbs. |
725 lbs. |
745 lbs. |
745 lbs. |
See Also: our ultra rugged portable
and stationary PB Series
More PB Series Details
Selection Notes:
The selection between these models is determined by use.
Generally, the longer the vacuum hose and the heavier the dust load, the more suction you
will want. If the powders you need to deal with are below 5 microns,
look for a machine with a air to cloth ratio less than 6.5:1.
| QVP75 |
The
QVP75 is tremendous for
ultra-fine powders where you need a 2" I.D. hose up to 75 ft long. Rugged and
powerful, it is recommended for heavy housekeeping, or tough jobs like paint oven
cleaning. Supports a central vac tube system up to 200 ft long .. with ease. |
|
| QVP75L |
The Large Canister version of
the above gives you lovely power with more storage capacity. And its low air to
cloth means it can still handle even the sub-micron powders. Recommended for the
same applications as the QVP75 above.
|
|
| QVP100 |
The best power you can get in
the DuroVac Q line-up! You get it all: dependable, industrial-class power and
triple
filtration assures trouble free operation with heavy powders. It's for serious
work with a 2" hose up to 100 ft long. Supports a central system network 350
ft. long. |
|
| QVP100L |
The Large Canister
10 Hp. version
features 29.2 US gallon capacity and 12" Hg. (168"
waterlift). If you want
extra storage capacity, include a "TopHat" drum separator.
If sub-micron fines are to be vacuumed, consider instead the DuroVac 15.
|
|
Need Help? Let us help
you decide. Yes! Send me more
information about:
mid-sized pd/pb industrial vacuums!
Toll Free (US)
1-877-844-3293
|
